1.5MM CS X 70MM ID BROWN FKM 75D

Part number VB75M1.5X70 is a brown Viton® (FKM) 75 Shore A O-Ring with an inside diameter of 70 mm (2.756 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 73 mm (2.87 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Viton® (FKM) is widely chosen for very low compression set at elevated temperature and the industry benchmark where nitrile reaches its thermal limit. It resists engine and transmission fluids, many acids, and chlorinated solvents. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). Applications involving ketones and esters or low-molecular-weight organic acids call for a different compound.

Common environments for this compound include chemical processing, semiconductor equipment, and aerospace.

Stocked as VB75M1.5X70 and sold individually. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.