Ordered as TST154, this is an AS568-154 white PTFE (Teflon) 55 Shore D Back-Up Ring built to an inside diameter of 3.737 in (94.92 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 3.943 in (100.15 mm). The back-up ring installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.
PTFE (Teflon) is specified here for near-universal chemical inertness and non-stick, non-contaminating surface characteristics. The compound resists solvents, nearly all industrial chemicals, and steam. Continuous operating temperature is published at -65°F (-53.9°C) to 500°F (260°C). It should not be specified for service in elemental fluorine at temperature or service requiring elastic recovery.
You will find this material specified across laboratory equipment, aggressive-media pipelines, and food and beverage.
Reference part number TST154 when ordering; the item is sold individually. Application requirements vary, so validate compatibility with your process conditions prior to installation.
Description -154 WHITE PTFE 55D SINGLE TURN
Actual Cross Section 0.103 inch (2.62 mm)
Actual Inside Diameter 3.737 inch (94.92 mm)
Actual Outside Diameter 3.943 inch (100.15 mm)
Measurement System Imperial
Product Category O-Rings - Backup Rings