This back-up ring is supplied in AS568-174 white PTFE (Teflon) 55 Shore D with an inside diameter of 8.737 in (221.92 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 8.943 in (227.15 mm), catalogued under part number TST174. It allows a standard o-ring to operate at higher pressures than it could unsupported.
Expect good resistance to solvents, oxidizing media, and nearly all industrial chemicals. That behavior comes from the compound itself: PTFE (Teflon) delivers excellent dielectric properties and a very wide continuous service temperature range. Published continuous service range is -65°F (-53.9°C) to 500°F (260°C). Exposure to molten alkali metals or service requiring elastic recovery will shorten service life.
You will find this material specified across chemical processing, pharmaceutical and biotech, and aggressive-media pipelines.
Stocked as TST174 and sold individually. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.
Description -174 WHITE PTFE 55D SINGLE TURN
Actual Cross Section 0.103 inch (2.62 mm)
Actual Inside Diameter 8.737 inch (221.92 mm)
Actual Outside Diameter 8.943 inch (227.15 mm)
Measurement System Imperial
Product Category O-Rings - Backup Rings