-178 WHITE PTFE 55D SINGLE TURN

PTFE Back-Up Ring, 9.737 in ID x 0.103 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
Material
PTFE (Polytetrafluoroethylene)
Dash Size
178
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/32 inch
Nominal Inside Diameter
9 3/4 inch
Nominal Outside Diameter
9 15/16 inch
Unit of Measure
EA
SKU:
TST178

Product Specification

-
This back-up ring is supplied in AS568-178 white PTFE (Teflon) 55 Shore D supplied with an inside diameter of 9.737 in (247.32 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 9.943 in (252.55 mm), catalogued under part number TST178. It allows a standard o-ring to operate at higher pressures than it could unsupported.

As a material, PTFE (Teflon) offers near-universal chemical inertness and a very wide continuous service temperature range. Expect good resistance to steam, strong acids and bases, and nearly all industrial chemicals. The material carries a published service range of -65°F (-53.9°C) to 500°F (260°C). Exposure to service requiring elastic recovery or molten alkali metals will shorten service life.

Typical settings include food and beverage, semiconductor fabrication, and pharmaceutical and biotech.

Stocked as TST178 and sold individually. Review your operating media and conditions against this specification before installation.
Item
TST178
Description
-178 WHITE PTFE 55D SINGLE TURN
Actual Cross Section
0.103 inch (2.62 mm)
Actual Inside Diameter
9.737 inch (247.32 mm)
Actual Outside Diameter
9.943 inch (252.55 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings