Ordered as TST268, this is an AS568-268 white PTFE (Teflon) 55 Shore D Back-Up Ring supplied with an inside diameter of 8.484 in (215.49 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 8.762 in (222.55 mm). The back-up ring installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.
It resists strong acids and bases, nearly all industrial chemicals, and solvents. That behavior comes from the compound itself: PTFE (Teflon) is known for non-stick, non-contaminating surface characteristics and a very wide continuous service temperature range. Rated temperature range runs from -65°F (-53.9°C) to 500°F (260°C) in continuous service. Applications involving service requiring elastic recovery or molten alkali metals call for a different compound.
You will find this material specified across semiconductor fabrication, aggressive-media pipelines, and laboratory equipment.
TST268 ships individually. Application requirements vary, so validate compatibility with your process conditions prior to installation. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.
Description -268 WHITE PTFE 55D SINGLE TURN
Actual Cross Section 0.139 inch (3.53 mm)
Actual Inside Diameter 8.484 inch (215.49 mm)
Actual Outside Diameter 8.762 inch (222.55 mm)
Measurement System Imperial
Product Category O-Rings - Backup Rings