-313 WHITE PTFE 55D SINGLE TURN

PTFE Back-Up Ring, 0.662 in ID x 0.21 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
Material
PTFE (Polytetrafluoroethylene)
Dash Size
313
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
11/16 inch
Nominal Outside Diameter
1 1/16 inch
Unit of Measure
EA
SKU:
TST313

Product Specification

-
The TST313 is an AS568-313 white PTFE (Teflon) 55 Shore D Back-Up Ring supplied with an inside diameter of 0.662 in (16.81 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 1.082 in (27.48 mm). This back-up ring extends o-ring service life by supporting the seal against extrusion under high pressure.

PTFE (Teflon) delivers non-stick, non-contaminating surface characteristics and one of the lowest coefficients of friction of any solid. It resists oxidizing media, solvents, and strong acids and bases. Continuous operating temperature is published at -65°F (-53.9°C) to 500°F (260°C).

It sees regular use in semiconductor fabrication, laboratory equipment, and pharmaceutical and biotech.

Reference part number TST313 when ordering; the item is sold individually. Review your operating media and conditions against this specification before installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.
Item
TST313
Description
-313 WHITE PTFE 55D SINGLE TURN
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
0.662 inch (16.81 mm)
Actual Outside Diameter
1.082 inch (27.48 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings