-314 WHITE PTFE 55D SINGLE TURN

PTFE Back-Up Ring, 0.725 in ID x 0.21 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
Material
PTFE (Polytetrafluoroethylene)
Dash Size
314
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
3/4 inch
Nominal Outside Diameter
1 1/8 inch
Unit of Measure
EA
SKU:
TST314

Product Specification

-
The TST314 is an AS568-314 white PTFE (Teflon) 55 Shore D Back-Up Ring with an inside diameter of 0.725 in (18.42 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 1.145 in (29.08 mm). This back-up ring allows a standard o-ring to operate at higher pressures than it could unsupported.

PTFE (Teflon) is specified for excellent dielectric properties and one of the lowest coefficients of friction of any solid. It resists oxidizing media, steam, and nearly all industrial chemicals. Continuous operating temperature is published at -65°F (-53.9°C) to 500°F (260°C). Exposure to molten alkali metals or elemental fluorine at temperature will shorten service life.

Typical settings include pharmaceutical and biotech, food and beverage, and semiconductor fabrication.

TST314 ships individually. Check the compound against your process media, pressure and temperature before committing to a design. For a size or compound outside the standard catalog, APG can quote from a print or sample.
Item
TST314
Description
-314 WHITE PTFE 55D SINGLE TURN
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
0.725 inch (18.42 mm)
Actual Outside Diameter
1.145 inch (29.08 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings