This back-up ring is supplied in AS568-323 white PTFE (Teflon) 55 Shore D with an inside diameter of 1.287 in (32.69 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 1.707 in (43.36 mm), catalogued under part number TST323. It installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.
As a material, PTFE (Teflon) is widely chosen for one of the lowest coefficients of friction of any solid and near-universal chemical inertness. It resists steam, solvents, and nearly all industrial chemicals. Published continuous service range is -65°F (-53.9°C) to 500°F (260°C). It should not be specified for service in molten alkali metals or elemental fluorine at temperature.
You will find this material specified across aggressive-media pipelines, pharmaceutical and biotech, and chemical processing.
TST323 ships individually. As always, verify media compatibility and operating conditions against the requirements of your specific application. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.
Description -323 WHITE PTFE 55D SINGLE TURN
Actual Cross Section 0.21 inch (5.33 mm)
Actual Inside Diameter 1.287 inch (32.69 mm)
Actual Outside Diameter 1.707 inch (43.36 mm)
Measurement System Imperial
Product Category O-Rings - Backup Rings