-357 WHITE PTFE 55D SINGLE TURN

PTFE Back-Up Ring, 5.475 in ID x 0.21 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
Material
PTFE (Polytetrafluoroethylene)
Dash Size
357
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
5 1/2 inch
Nominal Outside Diameter
5 7/8 inch
Unit of Measure
EA
SKU:
TST357

Product Specification

-
APG stocks the TST357, an AS568-357 white PTFE (Teflon) 55 Shore D Back-Up Ring with an inside diameter of 5.475 in (139.07 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 5.895 in (149.73 mm). A back-up ring installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.

The material holds up against strong acids and bases, nearly all industrial chemicals, and solvents. That behavior comes from the compound itself: PTFE (Teflon) is specified for a very wide continuous service temperature range and near-universal chemical inertness. The material carries a published service range of -65°F (-53.9°C) to 500°F (260°C).

Maintenance and OEM teams specify it across chemical processing, aggressive-media pipelines, and pharmaceutical and biotech.

TST357 ships individually. Nominal inside diameter is listed as 5 1/2 inch. Check the compound against your process media, pressure and temperature before committing to a design.
Item
TST357
Description
-357 WHITE PTFE 55D SINGLE TURN
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
5.475 inch (139.07 mm)
Actual Outside Diameter
5.895 inch (149.73 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings