-377 WHITE PTFE 55D SINGLE TURN

PTFE Back-Up Ring, 9.975 in ID x 0.21 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
Material
PTFE (Polytetrafluoroethylene)
Dash Size
377
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
10 inch
Nominal Outside Diameter
10 3/8 inch
Unit of Measure
EA
SKU:
TST377

Product Specification

-
This back-up ring is supplied in AS568-377 white PTFE (Teflon) 55 Shore D built to an inside diameter of 9.975 in (253.37 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 10.395 in (264.03 mm), catalogued under part number TST377. It installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.

As a material, PTFE (Teflon) is widely chosen for excellent dielectric properties and one of the lowest coefficients of friction of any solid. Expect good resistance to nearly all industrial chemicals, steam, and solvents. Continuous operating temperature is published at -65°F (-53.9°C) to 500°F (260°C). It should not be specified for service in molten alkali metals or elemental fluorine at temperature.

It sees regular use in aggressive-media pipelines, chemical processing, and pharmaceutical and biotech.

Stocked as TST377 and sold individually. As always, verify media compatibility and operating conditions against the requirements of your specific application.
Item
TST377
Description
-377 WHITE PTFE 55D SINGLE TURN
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
9.975 inch (253.37 mm)
Actual Outside Diameter
10.395 inch (264.03 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings