APG stocks the TST474, an AS568-474 white PTFE (Teflon) 55 Shore D Back-Up Ring built to an inside diameter of 24.94 in (633.48 mm), a cross section of 0.275 in (6.99 mm), and an outside diameter of 25.49 in (647.45 mm). A back-up ring installs on the low-pressure side of an o-ring to prevent extrusion into the clearance gap at elevated pressure.
PTFE (Teflon) is specified here for very wide continuous service temperature range and near-universal chemical inertness. It resists solvents, steam, and oxidizing media. Rated temperature range runs from -65°F (-53.9°C) to 500°F (260°C) in continuous service. It is not the right choice where service requiring elastic recovery or elemental fluorine at temperature are present.
Typical settings include semiconductor fabrication, aggressive-media pipelines, and chemical processing.
This item is sold individually under part number TST474. Application requirements vary, so validate compatibility with your process conditions prior to installation. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.
Description -474 WHITE PTFE 55D SINGLE TURN
Actual Cross Section 0.275 inch (6.99 mm)
Actual Inside Diameter 24.94 inch (633.48 mm)
Actual Outside Diameter 25.49 inch (647.45 mm)
Measurement System Imperial
Product Category O-Rings - Backup Rings