3 NOTCHED FERRULE 304 S/S

The 330FRLASS is an Ever-Tite Stainless Steel Notched Ferrule measuring a 3 inch nominal size. This notched ferrule clamps onto the hose using a banding tool rather than a crimping machine, so an assembly can be made without press equipment. It fits hose with an outside diameter of 3-15/32 in to 3-23/32 in. Unlike a crimp sleeve, which is swaged by a crimping machine, this ferrule is tightened with a banding tool.

As a material, Stainless Steel offers dimensional stability under thermal cycling and a hygienic, cleanable surface suited to sanitary process lines. It resists chemical attack, high pressure, and salt water and washdown. Exposure to galvanic pairing with dissimilar metals or chloride stress cracking in some grades will shorten service life.

It sees regular use in marine and offshore, chemical transfer, and petrochemical.

Stocked as 330FRLASS and sold individually. Unit weight is approximately 1.45 lb. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.