-332 WHITE PTFE 55D SOLID BACK-UP RING

PTFE Back-Up Ring, 2.35 in ID x 0.21 CS, 55D, White, -65 to 500°F

Status
Out of Stock
Est. Ship Date
Material
PTFE (Polytetrafluoroethylene)
Dash Size
332
Durometer
55 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
500°F (260°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
2 3/8 inch
Nominal Outside Diameter
2 3/4 inch
Unit of Measure
EA
SKU:
TST332SO

Product Specification

-
This back-up ring is supplied in AS568-332 white PTFE (Teflon) 55 Shore D built to an inside diameter of 2.35 in (59.69 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 2.77 in (70.36 mm), catalogued under part number TST332SO. It allows a standard o-ring to operate at higher pressures than it could unsupported.

The material holds up against steam, strong acids and bases, and oxidizing media. PTFE (Teflon) is specified for a very wide continuous service temperature range and non-stick, non-contaminating surface characteristics. Continuous operating temperature is published at -65°F (-53.9°C) to 500°F (260°C). Exposure to elemental fluorine at temperature or service requiring elastic recovery will shorten service life.

Maintenance and OEM teams specify it across chemical processing, food and beverage, and pharmaceutical and biotech.

Order part number TST332SO, sold individually. As always, verify media compatibility and operating conditions against the requirements of your specific application.
Item
TST332SO
Description
-332 WHITE PTFE 55D SOLID BACK-UP RING
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
2.35 inch (59.69 mm)
Actual Outside Diameter
2.77 inch (70.36 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6002
Product Category
O-Rings - Backup Rings