APG stocks the TES70043, an AS568-043 red PTFE-Encapsulated Silicone 70 Shore A O-Ring built to an inside diameter of 3.489 in (88.62 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 3.629 in (92.18 mm). An o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load. Source specification: ORING 70 Durometer.
The material holds up against wide temperature swings, nearly all process chemicals, and steam. PTFE-Encapsulated Silicone is widely chosen for a seamless PTFE jacket over a resilient silicone core and strong resistance to permeation. Published continuous service range is -75°F (-59.4°C) to 400°F (204.4°C). Exposure to installation over sharp edges or tight-radius dynamic flexing will shorten service life.
You will find this material specified across cryogenic and high-temperature equipment, pharmaceutical manufacturing, and chemical processing.
TES70043 ships individually. Nominal inside diameter is listed as 3 1/2 inch. Review your operating media and conditions against this specification before installation. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.
Description -043 RED FEP ENCAPSULATED SILICONE 85D
Actual Cross Section 0.07 inch (1.78 mm)
Actual Inside Diameter 3.489 inch (88.62 mm)
Actual Outside Diameter 3.629 inch (92.18 mm)
Measurement System Imperial
Product Category O-Rings - Bulk - AS568 Premium