APG stocks the TES70281, an AS568-281 red PTFE-Encapsulated Silicone 70 Shore A O-Ring built to an inside diameter of 14.984 in (380.59 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 15.262 in (387.65 mm). An o-ring creates a positive seal at flange, piston and rod interfaces without added hardware. Additional detail on this item: ORING 70 Durometer.
This material stands up to wide temperature swings, steam, and nearly all process chemicals. PTFE-Encapsulated Silicone is known for strong resistance to permeation and a non-contaminating, non-stick sealing surface. Published continuous service range is -75°F (-59.4°C) to 400°F (204.4°C). Exposure to tight-radius dynamic flexing or installation over sharp edges will shorten service life.
Typical settings include cryogenic and high-temperature equipment, pharmaceutical manufacturing, and food and beverage processing.
Reference part number TES70281 when ordering; the item is sold individually. Application requirements vary, so validate compatibility with your process conditions prior to installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.
Description -281 RED FEP ENCAPSULATED SILICONE 85D
Actual Cross Section 0.139 inch (3.53 mm)
Actual Inside Diameter 14.984 inch (380.59 mm)
Actual Outside Diameter 15.262 inch (387.65 mm)
Measurement System Imperial
Product Category O-Rings - Bulk - AS568 Premium