-314 CLEAR URETHANE 90D O-RING

Urethane O-Ring, 0.725 in ID x 0.21 CS, 90A, Clear, -65 to 200°F

Status
Out of Stock
Est. Ship Date
Material
Urethane
Dash Size
314
Durometer
90 Shore A
Cross Section Type
Round
Color
Clear
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
200°F (93.3°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
3/4 inch
Nominal Outside Diameter
1 1/8 inch
Unit of Measure
EA
SKU:
U90314

Product Specification

-
The U90314 is an AS568-314 clear Polyurethane (AU/EU) 90 Shore A O-Ring supplied with an inside diameter of 0.725 in (18.42 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 1.145 in (29.08 mm). This o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

Polyurethane (AU/EU) is specified here for exceptional abrasion resistance and toughness that outperforms conventional rubber compounds. The compound resists abrasion and wear, extrusion under high pressure, and petroleum oils. Published continuous service range is -65°F (-53.9°C) to 200°F (93.3°C).

It sees regular use in hydraulic cylinders, off-highway equipment, and press and forming equipment.

This item is sold individually under part number U90314. Nominal inside diameter is listed as 3/4 inch. As always, verify media compatibility and operating conditions against the requirements of your specific application. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.
Item
U90314
Description
-314 CLEAR URETHANE 90D O-RING
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
0.725 inch (18.42 mm)
Actual Outside Diameter
1.145 inch (29.08 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6006
Product Category
O-Rings - Bulk - AS568 Premium