-316 BLACK BUNA 70D SQUARE RING

Buna-N Square-Cut Ring, 0.85 in ID x 0.21 CS, 70A, Black, -40 to 250°F

Status
Out of Stock
Est. Ship Date
6 Apr 2027
Material
Buna-N (Nitrile / NBR)
Dash Size
316
Durometer
70 Shore A
Cross Section Type
Square
Color
Black
Minimum Temperature
-40°F (-40°C)
Maximum Temperature
250°F (121°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
7/8 inch
Nominal Outside Diameter
1 1/4 inch
Unit of Measure
EA
SKU:
SH70316

Product Specification

-
Part number SH70316 is an AS568-316 black Buna-N (Nitrile) 70 Shore A Square-Cut Ring built to an inside diameter of 0.85 in (21.59 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 1.27 in (32.26 mm). A square-cut ring seals with a broad flat contact band instead of the line contact of a round-section ring.

This material stands up to water, hydraulic fluids, and many alcohols. Buna-N (Nitrile) is valued for reliable performance in both static and dynamic service, the most widely specified general-purpose sealing elastomer. Service temperature is rated from -40°F (-40°C) through 250°F (121.1°C). Exposure to ozone and direct sunlight or strong acids will shorten service life. The profile itself contributes a flat contact band that spreads sealing load across a wider area and greater resistance to extrusion than a round section of the same size. Note that a square section is less suited to high-speed rotary service, where the larger contact area raises friction and heat.

Common environments for this compound include fluid power, agricultural equipment, and general industrial maintenance.

Order part number SH70316, sold individually. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.
Item
SH70316
Description
-316 BLACK BUNA 70D SQUARE RING
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
0.85 inch (21.59 mm)
Actual Outside Diameter
1.27 inch (32.26 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6017
Product Category
O-Rings - Square/Quad - Commodity