-349 CLEAR URETHANE 90D O-RING

Urethane O-Ring, 4.475 in ID x 0.21 CS, 90A, Clear, -65 to 200°F

Status
Out of Stock
Est. Ship Date
Material
Urethane
Dash Size
349
Durometer
90 Shore A
Cross Section Type
Round
Color
Clear
Minimum Temperature
-65°F (-53.9°C)
Maximum Temperature
200°F (93.3°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
4 1/2 inch
Nominal Outside Diameter
4 7/8 inch
Unit of Measure
EA
SKU:
U90349

Product Specification

-
The U90349 is an AS568-349 clear Polyurethane (AU/EU) 90 Shore A O-Ring supplied with an inside diameter of 4.475 in (113.67 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 4.895 in (124.33 mm). This o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

As a material, Polyurethane (AU/EU) delivers toughness that outperforms conventional rubber compounds, very high tensile strength and load capacity. Expect good resistance to extrusion under high pressure, impact and shock loading, and ozone. The material carries a published service range of -65°F (-53.9°C) to 200°F (93.3°C).

It sees regular use in off-highway equipment, construction machinery, and mining and heavy equipment.

Order part number U90349, sold individually. Nominal inside diameter is listed as 4 1/2 inch. As always, verify media compatibility and operating conditions against the requirements of your specific application. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.
Item
U90349
Description
-349 CLEAR URETHANE 90D O-RING
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
4.475 inch (113.67 mm)
Actual Outside Diameter
4.895 inch (124.33 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6006
Product Category
O-Rings - Bulk - AS568 Premium