-379 BLACK BUNA 70D SQUARE RING

Buna-N Square-Cut Ring, 10.975 in ID x 0.21 CS, 70A, Black, -40 to 250°F

Status
Out of Stock
Est. Ship Date
6 Apr 2027
Material
Buna-N (Nitrile / NBR)
Dash Size
379
Durometer
70 Shore A
Cross Section Type
Square
Color
Black
Minimum Temperature
-40°F (-40°C)
Maximum Temperature
250°F (121°C)
Nominal Cross Section
3/16 inch
Nominal Inside Diameter
11 inch
Nominal Outside Diameter
11 3/8 inch
Unit of Measure
EA
SKU:
SH70379

Product Specification

-
Ordered as SH70379, this is an AS568-379 black Buna-N (Nitrile) 70 Shore A Square-Cut Ring built to an inside diameter of 10.975 in (278.77 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 11.395 in (289.43 mm). The square-cut ring seals with a broad flat contact band instead of the line contact of a round-section ring.

This material stands up to greases and lubricants, propane and butane, and hydraulic fluids. That behavior comes from the compound itself: Buna-N (Nitrile) delivers the most widely specified general-purpose sealing elastomer and an economical choice for high-volume maintenance programs. Published continuous service range is -40°F (-40°C) to 250°F (121.1°C). The profile itself contributes greater resistance to extrusion than a round section of the same size and a flat contact band that spreads sealing load across a wider area. Note that a square section is less suited to high-speed rotary service, where the larger contact area raises friction and heat.

It sees regular use in fluid power, automotive, and hydraulic and pneumatic systems.

Stocked as SH70379 and sold individually. Nominal inside diameter is listed as 11 inch. Review your operating media and conditions against this specification before installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.
Item
SH70379
Description
-379 BLACK BUNA 70D SQUARE RING
Actual Cross Section
0.21 inch (5.33 mm)
Actual Inside Diameter
10.975 inch (278.77 mm)
Actual Outside Diameter
11.395 inch (289.43 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6017
Product Category
O-Rings - Square/Quad - Commodity