This o-ring is supplied in AS568-216 white Viton® (FKM) 60 Shore A supplied with an inside diameter of 1.109 in (28.17 mm), a cross section of 0.139 in (3.53 mm), and an outside diameter of 1.387 in (35.23 mm), catalogued under part number V60FDA216. It provides a reliable static or dynamic seal by deforming into its gland under assembly load.
As a material, Viton® (FKM) is widely chosen for outstanding high-temperature capability and very low compression set at elevated temperature. It resists chlorinated solvents, petroleum oils and fuels, and aromatic hydrocarbons. Published continuous service range is -15°F (-26.1°C) to 400°F (204.4°C). Verify compatibility before use with hot water and steam or ketones and esters.
This item meets FDA requirements for food contact under 21 CFR 177.2600. You will find this material specified across aerospace, automotive fuel systems, and oil and gas.
This item is sold individually under part number V60FDA216. Unit weight is approximately 1.989 g. Application requirements vary, so validate compatibility with your process conditions prior to installation. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.
Description -216 WHITE FKM 60D FDA O-RING
Actual Cross Section 0.139 inch (3.53 mm)
Actual Inside Diameter 1.109 inch (28.17 mm)
Actual Outside Diameter 1.387 inch (35.23 mm)
Measurement System Imperial
Product Category O-Rings - FDA / Metal Detectable