2MM CS X 105MM ID BLACK FKM 75D

The V2X105 is a black Viton® (FKM) 75 Shore A O-Ring built to an inside diameter of 105 mm (4.134 in), a cross section of 2 mm (0.079 in), and an outside diameter of 109 mm (4.29 in). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Viton® (FKM) is specified here for very low compression set at elevated temperature and long service life in hot, chemically aggressive environments. Expect good resistance to chlorinated solvents, aggressive chemicals, and engine and transmission fluids. Rated temperature range runs from -15°F (-26.1°C) to 400°F (204.4°C) in continuous service. It should not be specified for service in hot water and steam or ketones and esters.

You will find this material specified across automotive fuel systems, oil and gas, and semiconductor equipment.

Reference part number V2X105 when ordering; the item is sold individually. Unit weight is approximately 1.9269 g. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.