1.5MM CS X 11.5MM ID BLACK FKM 75D

Part number V1.5X11.5 is a black Viton® (FKM) 75 Shore A O-Ring with an inside diameter of 11.5 mm (0.453 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 14.5 mm (0.57 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces. Source specification: Metric O-RING, JIS S12.

Viton® (FKM) is specified here for industry benchmark where nitrile reaches its thermal limit and very low compression set at elevated temperature. This material stands up to petroleum oils and fuels, aggressive chemicals, and chlorinated solvents. Published continuous service range is -15°F (-26.1°C) to 400°F (204.4°C). It is not the right choice where amines or hot water and steam are present.

It sees regular use in chemical processing, high-temperature process equipment, and semiconductor equipment.

Order part number V1.5X11.5, sold individually. Unit weight is approximately 0.1305 g. Check the compound against your process media, pressure and temperature before committing to a design.