-115 BROWN FKM 75D O-RING

Ordered as VB75115, this is an AS568-115 brown Viton® (FKM) 75 Shore A O-Ring built to an inside diameter of 0.674 in (17.12 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 0.88 in (22.35 mm). The o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Viton® (FKM) is specified for long service life in hot, chemically aggressive environments and very low compression set at elevated temperature. The material holds up against engine and transmission fluids, petroleum oils and fuels, and chlorinated solvents. Rated temperature range runs from -15°F (-26.1°C) to 400°F (204.4°C) in continuous service.

Typical settings include chemical processing, aerospace, and high-temperature process equipment.

Order part number VB75115, sold individually. Unit weight is approximately 0.6944 g. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.