2.4MM CS X 11.6MM ID BLACK FKM 75D

APG stocks the V2.4X11.6, a black Viton® (FKM) 75 Shore A O-Ring built to an inside diameter of 11.6 mm (0.457 in), a cross section of 2.4 mm (0.094 in), and an outside diameter of 16.4 mm (0.65 in). An o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load.

Viton® (FKM) delivers excellent resistance to compression set and permeation, very low compression set at elevated temperature. This material stands up to chlorinated solvents, petroleum oils and fuels, and many acids. Rated temperature range runs from -15°F (-26.1°C) to 400°F (204.4°C) in continuous service. It is not the right choice where ketones and esters or hot water and steam are present.

You will find this material specified across semiconductor equipment, high-temperature process equipment, and chemical processing.

V2.4X11.6 ships individually. Unit weight is approximately 0.0004 g. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.