2MM CS X 13MM ID BLACK FKM 75D

Ordered as V2X13, this is a black Viton® (FKM) 75 Shore A O-Ring supplied with an inside diameter of 13 mm (0.512 in), a cross section of 2 mm (0.079 in), and an outside diameter of 17 mm (0.67 in). The o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load.

This material stands up to petroleum oils and fuels, chlorinated solvents, and engine and transmission fluids. That behavior comes from the compound itself: Viton® (FKM) is widely chosen for very low compression set at elevated temperature and the industry benchmark where nitrile reaches its thermal limit. The material carries a published service range of -15°F (-26.1°C) to 400°F (204.4°C). Applications involving hot water and steam or low-molecular-weight organic acids call for a different compound.

You will find this material specified across chemical processing, automotive fuel systems, and aerospace.

Reference part number V2X13 when ordering; the item is sold individually. Unit weight is approximately 0.277 g. As always, verify media compatibility and operating conditions against the requirements of your specific application. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.