6MM CS X 142MM ID BLACK FKM 75D

This o-ring is supplied in black Viton® (FKM) 75 Shore A built to an inside diameter of 142 mm (5.591 in), a cross section of 6 mm (0.236 in), and an outside diameter of 154 mm (6.06 in), catalogued under part number V6X142. It seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

As a material, Viton® (FKM) delivers very low compression set at elevated temperature and the industry benchmark where nitrile reaches its thermal limit. It resists aromatic hydrocarbons, many acids, and petroleum oils and fuels. The material carries a published service range of -15°F (-26.1°C) to 400°F (204.4°C). Verify compatibility before use with ketones and esters or hot water and steam.

You will find this material specified across high-temperature process equipment, semiconductor equipment, and oil and gas.

Reference part number V6X142 when ordering; the item is sold individually. Unit weight is approximately 0.0241 g. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.