1MM CS X 1.5MM ID BLACK FKM 75D

Part number V1X1.5 is a black Viton® (FKM) 75 Shore A O-Ring with an inside diameter of 1.5 mm (0.059 in), a cross section of 1 mm (0.039 in), and an outside diameter of 3.5 mm (0.14 in). An o-ring compresses into its gland to block fluid or gas migration across a joint.

As a material, Viton® (FKM) is specified for very low compression set at elevated temperature and the industry benchmark where nitrile reaches its thermal limit. Expect good resistance to aromatic hydrocarbons, chlorinated solvents, and petroleum oils and fuels. The material carries a published service range of -15°F (-26.1°C) to 400°F (204.4°C). Verify compatibility before use with ketones and esters or low-molecular-weight organic acids.

Typical settings include chemical processing, semiconductor equipment, and aerospace.

Order part number V1X1.5, sold individually. Unit weight is approximately 0.012 g. Review your operating media and conditions against this specification before installation. APG can cross-reference from an existing part number, a drawing or a physical sample if this size is not an exact match.