1.5MM CS X 16MM ID BROWN FKM 75D

APG stocks the VB75M1.5X16, a brown Viton® (FKM) 75 Shore A O-Ring supplied with an inside diameter of 16 mm (0.63 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 19 mm (0.75 in). An o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

Viton® (FKM) delivers very low compression set at elevated temperature, excellent resistance to compression set and permeation. The material holds up against chlorinated solvents, engine and transmission fluids, and aggressive chemicals. Service temperature is rated from -15°F (-26.1°C) through 400°F (204.4°C). Verify compatibility before use with ketones and esters or low-molecular-weight organic acids.

Typical settings include aerospace, semiconductor equipment, and automotive fuel systems.

VB75M1.5X16 ships individually. Unit weight is approximately 0.2023 g. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing.