1.5MM CS X 29MM ID BLACK FKM 75D

The V1.5X29 is a black Viton® (FKM) 75 Shore A O-Ring measuring an inside diameter of 29 mm (1.142 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 32 mm (1.26 in). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

As a material, Viton® (FKM) offers the industry benchmark where nitrile reaches its thermal limit and very low compression set at elevated temperature. It resists aggressive chemicals, chlorinated solvents, and aromatic hydrocarbons. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). Exposure to ketones and esters or low-molecular-weight organic acids will shorten service life.

Common environments for this compound include high-temperature process equipment, chemical processing, and oil and gas.

Stocked as V1.5X29 and sold individually. Unit weight is approximately 0.3013 g. Check the compound against your process media, pressure and temperature before committing to a design.