3MM CS X 30MM ID BROWN FKM 75D

This o-ring is supplied in brown Viton® (FKM) 75 Shore A measuring an inside diameter of 30 mm (1.181 in), a cross section of 3 mm (0.118 in), and an outside diameter of 36 mm (1.42 in), catalogued under part number VB75M3X30. It remains the most cost-effective sealing element available for pressurized assemblies.

Viton® (FKM) is specified here for industry benchmark where nitrile reaches its thermal limit and long service life in hot, chemically aggressive environments. Expect good resistance to engine and transmission fluids, chlorinated solvents, and aromatic hydrocarbons. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). It should not be specified for service in low-molecular-weight organic acids or amines.

You will find this material specified across chemical processing, semiconductor equipment, and aerospace.

Stocked as VB75M3X30 and sold individually. Unit weight is approximately 1.4868 g. Review your operating media and conditions against this specification before installation.