The V1.5X45 is a black Viton® (FKM) 75 Shore A O-Ring built to an inside diameter of 45 mm (1.772 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 48 mm (1.89 in). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.
Expect good resistance to aromatic hydrocarbons, petroleum oils and fuels, and chlorinated solvents. Viton® (FKM) delivers outstanding high-temperature capability and very low compression set at elevated temperature. Published continuous service range is -15°F (-26.1°C) to 400°F (204.4°C).
Typical settings include chemical processing, automotive fuel systems, and oil and gas.
This item is sold individually under part number V1.5X45. Unit weight is approximately 0.466 g. Application requirements vary, so validate compatibility with your process conditions prior to installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.
Description 1.5MM CS X 45MM ID BLACK FKM 75D
Actual Outside Diameter 48 mm (1.89 inch)
Actual Cross Section 1.5 mm (0.059 inch)
Actual Inside Diameter 45 mm (1.772 inch)
Measurement System Metric
Product Category O-Rings - Metric - Commodity