Part number V1.5X67 is a black Viton® (FKM) 75 Shore A O-Ring with an inside diameter of 67 mm (2.638 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 70 mm (2.76 in). An o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load.
As a material, Viton® (FKM) is specified for outstanding high-temperature capability and very low compression set at elevated temperature. This material stands up to engine and transmission fluids, chlorinated solvents, and aromatic hydrocarbons. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C).
It sees regular use in semiconductor equipment, chemical processing, and high-temperature process equipment.
This item is sold individually under part number V1.5X67. Unit weight is approximately 0.7115 g. Check the compound against your process media, pressure and temperature before committing to a design. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.
Description 1.5MM CS X 67MM ID BLACK FKM 75D
Actual Outside Diameter 70 mm (2.76 inch)
Actual Cross Section 1.5 mm (0.059 inch)
Actual Inside Diameter 67 mm (2.638 inch)
Measurement System Metric
Product Category O-Rings - Metric - Commodity