APG stocks the V2X82, a black Viton® (FKM) 75 Shore A O-Ring built to an inside diameter of 82 mm (3.228 in), a cross section of 2 mm (0.079 in), and an outside diameter of 86 mm (3.39 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.
Viton® (FKM) is specified here for very low compression set at elevated temperature and long service life in hot, chemically aggressive environments. Expect good resistance to engine and transmission fluids, many acids, and chlorinated solvents. Published continuous service range is -15°F (-26.1°C) to 400°F (204.4°C).
Typical settings include chemical processing, oil and gas, and aerospace.
Order part number V2X82, sold individually. Unit weight is approximately 1.5167 g. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.
Description 2MM CS X 82MM ID BLACK FKM 75D
Actual Outside Diameter 86 mm (3.39 inch)
Actual Cross Section 2 mm (0.079 inch)
Actual Inside Diameter 82 mm (3.228 inch)
Measurement System Metric
Product Category O-Rings - Metric - Commodity