2MM CS X 91MM ID BLACK FKM 75D

Part number V2X91 is a black Viton® (FKM) 75 Shore A O-Ring supplied with an inside diameter of 91 mm (3.583 in), a cross section of 2 mm (0.079 in), and an outside diameter of 95 mm (3.74 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

The compound resists aromatic hydrocarbons, petroleum oils and fuels, and engine and transmission fluids. Viton® (FKM) is widely chosen for long service life in hot, chemically aggressive environments, excellent resistance to compression set and permeation. The material carries a published service range of -15°F (-26.1°C) to 400°F (204.4°C). Verify compatibility before use with low-molecular-weight organic acids or ketones and esters.

You will find this material specified across automotive fuel systems, oil and gas, and semiconductor equipment.

V2X91 ships individually. Unit weight is approximately 1.6598 g. Check the compound against your process media, pressure and temperature before committing to a design. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.