4MM CS X 92MM ID BLACK FKM 75D

The V4X92 is a black Viton® (FKM) 75 Shore A O-Ring measuring an inside diameter of 92 mm (3.622 in), a cross section of 4 mm (0.157 in), and an outside diameter of 100 mm (3.94 in). This o-ring provides a reliable static or dynamic seal by deforming into its gland under assembly load.

As a material, Viton® (FKM) is specified for excellent resistance to compression set and permeation, very low compression set at elevated temperature. It resists chlorinated solvents, many acids, and aromatic hydrocarbons. Rated temperature range runs from -15°F (-26.1°C) to 400°F (204.4°C) in continuous service. Exposure to ketones and esters or hot water and steam will shorten service life.

You will find this material specified across high-temperature process equipment, aerospace, and semiconductor equipment.

Stocked as V4X92 and sold individually. Unit weight is approximately 7.113 g. Check the compound against your process media, pressure and temperature before committing to a design. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.