-111 BROWN FKM 90D O-RING

The VB90111 is an AS568-111 brown Viton® (FKM) 90 Shore A O-Ring measuring an inside diameter of 0.424 in (10.77 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 0.63 in (16 mm). This o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

Viton® (FKM) is widely chosen for very low compression set at elevated temperature and long service life in hot, chemically aggressive environments. Expect good resistance to chlorinated solvents, aromatic hydrocarbons, and engine and transmission fluids. Continuous operating temperature is published at -15°F (-26.1°C) to 400°F (204.4°C). Verify compatibility before use with hot water and steam or amines.

Typical settings include oil and gas, automotive fuel systems, and chemical processing.

VB90111 ships individually. Unit weight is approximately 0.535 g and nominal inside diameter is listed as 7/16 inch. Application requirements vary, so validate compatibility with your process conditions prior to installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.