*4035-366Y MINNESOTA RUBBER QUAD RING

This quad-ring is supplied in AS568-035 black Buna-N (Nitrile) 70 Shore A measuring an inside diameter of 2.239 in (56.87 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 2.379 in (60.43 mm), catalogued under part number HQ4035. It delivers lower friction and better sealing stability than a comparable round-section o-ring.

Buna-N (Nitrile) is widely chosen for the most widely specified general-purpose sealing elastomer and an economical choice for high-volume maintenance programs. This material stands up to greases and lubricants, water, and propane and butane. Rated temperature range runs from -40°F (-40°C) to 250°F (121.1°C) in continuous service. Exposure to strong acids or ozone and direct sunlight will shorten service life. The profile itself contributes lower compressive load required to achieve a seal and two sealing bands per contact face rather than one.

It sees regular use in general industrial maintenance, fluid power, and automotive.

Reference part number HQ4035 when ordering; the item is sold individually. Nominal inside diameter is listed as 2 1/4 inch. As always, verify media compatibility and operating conditions against the requirements of your specific application. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.