You have no items in your shopping cart.

*4149-366Y MINNESOTA RUBBER QUAD RING

Buna-N Quad-Ring, 2.8 in ID x 0.103 CS, 70A, Black, -40 to 250°F

Available Stock
0
Status
Out of Stock
Material
Buna-N (Nitrile / NBR)
Dash
149
Durometer
70 Shore A
Cross_Section_Type
Quad
Color
Black
Minimum_Temp
-40°F (-40°C)
Maximum_Temp
250°F (121°C)
Nominal_CS
3/32 inch
Nominal_ID
2 13/16 inch
Nominal_OD
3 inch
u_m
EA
SKU:
HQ4149

Product Specification

-
This quad-ring is supplied in AS568-149 black Buna-N (Nitrile) 70 Shore A quad profile with an inside diameter of 2.8 in (71.12 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 3.006 in (76.35 mm), catalogued under part number HQ4149. It resists spiral failure in reciprocating service thanks to its multi-lobe geometry.

The material holds up against hydraulic fluids, many alcohols, and water. Buna-N (Nitrile) delivers low compression set under sustained load and the most widely specified general-purpose sealing elastomer. Service temperature is rated from -40°F (-40°C) through 250°F (121.1°C). Applications involving polar solvents or ketones call for a different compound.

Typical settings include hydraulic and pneumatic systems, general industrial maintenance, and agricultural equipment.

Reference part number HQ4149 when ordering; the item is sold individually. Review your operating media and conditions against this specification before installation.
item
HQ4149
description
*4149-366Y MINNESOTA RUBBER QUAD RING
Product_ID
HQ4149
Actual_ID
2.8 inch (71.12 mm)
Actual_OD
3.006 inch (76.35 mm)
Actual_CS
0.103 inch (2.62 mm)
FDA
No
Measure
Imperial
Metal_Detectable
No
NSF
No
ProductCode
6018
ProductCode Description
O-Rings - Square/Quad - Premium
UF_Backorderable
0