**4152-366Y MINNESOTA RUBBER QUAD RING

Part number HQ4152 is an AS568-152 black Buna-N (Nitrile) 70 Shore A Quad-Ring supplied with an inside diameter of 3.237 in (82.22 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 3.443 in (87.45 mm). A quad-ring uses a four-lobed profile to create two sealing surfaces per side, reducing the squeeze needed to seal.

Buna-N (Nitrile) is specified here for reliable performance in both static and dynamic service, most widely specified general-purpose sealing elastomer. This material stands up to hydraulic fluids, greases and lubricants, and petroleum-based oils. Published continuous service range is -40°F (-40°C) to 250°F (121.1°C). The profile itself contributes lower compressive load required to achieve a seal and two sealing bands per contact face rather than one.

Typical settings include general industrial maintenance, construction equipment, and agricultural equipment.

HQ4152 ships individually. Nominal inside diameter is listed as 3 1/4 inch. Confirm chemical compatibility, pressure and temperature against your own application requirements before installing. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.