*4372-366Y MINNESOTA RUBBER QUAD RING

This quad-ring is supplied in AS568-372 black Buna-N (Nitrile) 70 Shore A built to an inside diameter of 8.725 in (221.62 mm), a cross section of 0.21 in (5.33 mm), and an outside diameter of 9.145 in (232.28 mm), catalogued under part number HQ4372. It provides a dual sealing band on each contact face for improved reliability.

Buna-N (Nitrile) is specified here for most widely specified general-purpose sealing elastomer and low compression set under sustained load. The compound resists petroleum-based oils, propane and butane, and hydraulic fluids. Service temperature is rated from -40°F (-40°C) through 250°F (121.1°C). The profile itself contributes lower compressive load required to achieve a seal and two sealing bands per contact face rather than one.

It sees regular use in agricultural equipment, fluid power, and construction equipment.

Stocked as HQ4372 and sold individually. Nominal inside diameter is listed as 8 3/4 inch. Application requirements vary, so validate compatibility with your process conditions prior to installation. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.