-029 GREEN HNBR 80D O-RING

HNBR O-Ring, 1.489 in ID x 0.07 CS, 80A, Green, -40 to 325°F

Status
Out of Stock
Est. Ship Date
Material
HNBR
Dash Size
29
Durometer
80 Shore A
Cross Section Type
Round
Color
Green
Minimum Temperature
-40°F (-40°C)
Maximum Temperature
325°F (163°C)
Nominal Cross Section
1/16 inch
Nominal Inside Diameter
1 1/2 inch
Nominal Outside Diameter
1 5/8 inch
Unit of Measure
EA
SKU:
HSN80029

Product Specification

-
HSN80029 is an AS568-029 green HNBR (Hydrogenated Nitrile) 80 Shore A O-Ring supplied with an inside diameter of 1.489 in (37.82 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 1.629 in (41.38 mm). In service, this o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

The compound resists petroleum oils and fuels, heat and oxidation, and modern refrigerants. That behavior comes from the compound itself: HNBR (Hydrogenated Nitrile) is specified for the oil resistance of nitrile with substantially better heat capability, excellent abrasion and tear strength. The material carries a published service range of -40°F (-40°C) to 325°F (162.8°C). It is not the right choice where chlorinated hydrocarbons or ketones are present.

Common environments for this compound include engine timing systems, heavy-duty powertrain, and oilfield and downhole equipment.

Reference part number HSN80029 when ordering; the item is sold individually. Nominal inside diameter is listed as 1 1/2 inch. Review your operating media and conditions against this specification before installation. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.
Item
HSN80029
Description
-029 GREEN HNBR 80D O-RING
Actual Cross Section
0.07 inch (1.78 mm)
Actual Inside Diameter
1.489 inch (37.82 mm)
Actual Outside Diameter
1.629 inch (41.38 mm)
FDA Compliant
No
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6006
Product Category
O-Rings - Bulk - AS568 Premium