-029 WHITE BUNA 70D FDA O-RING

Buna-N O-Ring, 1.489 in ID x 0.07 CS, 70A, White, FDA, -40 to 250°F

Status
Available
Est. Ship Date
31 Oct 2026
Material
Buna-N (Nitrile / NBR)
Dash Size
29
Durometer
70 Shore D
Cross Section Type
Round
Color
White
Minimum Temperature
-40°F (-40°C)
Maximum Temperature
250°F (121°C)
Nominal Cross Section
1/16 inch
Nominal Inside Diameter
1 1/2 inch
Nominal Outside Diameter
1 5/8 inch
Unit of Measure
EA
SKU:
H70FDA029
Please login to see price and add to cart

Product Specification

-
H70FDA029 is an AS568-029 white Buna-N (Nitrile) 70 Shore A O-Ring supplied with an inside diameter of 1.489 in (37.82 mm), a cross section of 0.07 in (1.78 mm), and an outside diameter of 1.629 in (41.38 mm). In service, this o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

As a material, Buna-N (Nitrile) is valued for low compression set under sustained load and the most widely specified general-purpose sealing elastomer. This material stands up to hydraulic fluids, propane and butane, and petroleum-based oils. Continuous operating temperature is published at -40°F (-40°C) to 250°F (121.1°C). Applications involving ketones or polar solvents call for a different compound.

This o-ring meets FDA requirements for food contact under 21 CFR 177.2600. It sees regular use in agricultural equipment, hydraulic and pneumatic systems, and automotive.

Stocked as H70FDA029 and sold individually. Unit weight is approximately 0.385 g and nominal inside diameter is listed as 1 1/2 inch. Review your operating media and conditions against this specification before installation.
Item
H70FDA029
Description
-029 WHITE BUNA 70D FDA O-RING
Actual Cross Section
0.07 inch (1.78 mm)
Actual Inside Diameter
1.489 inch (37.82 mm)
Actual Outside Diameter
1.629 inch (41.38 mm)
FDA Compliant
Yes
Measurement System
Imperial
Metal Detectable
No
NSF Certified
No
Product Code
6012
Product Category
O-Rings - FDA / Metal Detectable