-110 WHITE BUNA 70D FDA O-RING

H70FDA110 is an AS568-110 white Buna-N (Nitrile) 70 Shore A O-Ring built to an inside diameter of 0.362 in (9.19 mm), a cross section of 0.103 in (2.62 mm), and an outside diameter of 0.568 in (14.43 mm). In service, this o-ring remains the most cost-effective sealing element available for pressurized assemblies.

Buna-N (Nitrile) is specified here for low compression set under sustained load, strong abrasion and tear resistance. Expect good resistance to petroleum-based oils, greases and lubricants, and water. Published continuous service range is -40°F (-40°C) to 250°F (121.1°C). It is not the right choice where strong acids or polar solvents are present.

The compound meets FDA requirements for food contact under 21 CFR 177.2600. It sees regular use in fluid power, agricultural equipment, and automotive.

Stocked as H70FDA110 and sold individually. Unit weight is approximately 0.26 g. Check the compound against your process media, pressure and temperature before committing to a design. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.