6MM CS X 10MM ID BLACK BUNA 70D

The H6X10 is a black Buna-N (Nitrile) 70 Shore A O-Ring supplied with an inside diameter of 10 mm (0.394 in), a cross section of 6 mm (0.236 in), and an outside diameter of 22 mm (0.87 in). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Buna-N (Nitrile) is specified for the most widely specified general-purpose sealing elastomer and low compression set under sustained load. It resists hydraulic fluids, propane and butane, and greases and lubricants. Continuous operating temperature is published at -40°F (-40°C) to 250°F (121.1°C). It should not be specified for service in automotive brake fluid or ketones.

Common environments for this compound include hydraulic and pneumatic systems, automotive, and construction equipment.

H6X10 ships individually. Unit weight is approximately 1.79 g. Application requirements vary, so validate compatibility with your process conditions prior to installation. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.