1.5MM CS X 3MM ID BLACK BUNA 70D

The H1.5X3 is a black Buna-N (Nitrile) 70 Shore A O-Ring supplied with an inside diameter of 3 mm (0.118 in), a cross section of 1.5 mm (0.059 in), and an outside diameter of 6 mm (0.24 in). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Buna-N (Nitrile) is widely chosen for strong abrasion and tear resistance, low compression set under sustained load. Expect good resistance to propane and butane, water, and many alcohols. Service temperature is rated from -40°F (-40°C) through 250°F (121.1°C). It should not be specified for service in automotive brake fluid or ozone and direct sunlight.

Typical settings include construction equipment, automotive, and fluid power.

Reference part number H1.5X3 when ordering; the item is sold individually. Unit weight is approximately 0.0315 g. Check the compound against your process media, pressure and temperature before committing to a design. For a size or compound outside the standard catalog, APG can quote from a print or sample.