2.4MM CS X 8.3MM ID BLACK BUNA 70D

Ordered as H2.4X8.3, this is a black Buna-N (Nitrile) 70 Shore A O-Ring supplied with an inside diameter of 8.3 mm (0.327 in), a cross section of 2.4 mm (0.094 in), and an outside diameter of 13.1 mm (0.52 in). The o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.

As a material, Buna-N (Nitrile) is widely chosen for the most widely specified general-purpose sealing elastomer and low compression set under sustained load. The material holds up against greases and lubricants, propane and butane, and water. Published continuous service range is -40°F (-40°C) to 250°F (121.1°C).

You will find this material specified across general industrial maintenance, automotive, and agricultural equipment.

H2.4X8.3 ships individually. Application requirements vary, so validate compatibility with your process conditions prior to installation. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.