The H2X9.5 is a black Buna-N (Nitrile) 70 Shore A O-Ring built to an inside diameter of 9.5 mm (0.374 in), a cross section of 2 mm (0.079 in), and an outside diameter of 13.5 mm (0.53 in). This o-ring creates a positive seal at flange, piston and rod interfaces without added hardware.
Buna-N (Nitrile) is specified here for low compression set under sustained load, strong abrasion and tear resistance. The compound resists petroleum-based oils, water, and greases and lubricants. The material carries a published service range of -40°F (-40°C) to 250°F (121.1°C).
Common environments for this compound include general industrial maintenance, agricultural equipment, and automotive.
H2X9.5 ships individually. Check the compound against your process media, pressure and temperature before committing to a design.
Description 2MM CS X 9.5MM ID BLACK BUNA 70D
Actual Outside Diameter 13.5 mm (0.53 inch)
Actual Cross Section 2 mm (0.079 inch)
Actual Inside Diameter 9.5 mm (0.374 inch)
Measurement System Metric
Product Category O-Rings - Metric - Commodity