APG stocks the H2X96, a black Buna-N (Nitrile) 70 Shore A O-Ring with an inside diameter of 96 mm (3.78 in), a cross section of 2 mm (0.079 in), and an outside diameter of 100 mm (3.94 in). An o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.
Buna-N (Nitrile) is specified here for low compression set under sustained load and most widely specified general-purpose sealing elastomer. The material holds up against petroleum-based oils, water, and propane and butane. Service temperature is rated from -40°F (-40°C) through 250°F (121.1°C).
It sees regular use in hydraulic and pneumatic systems, construction equipment, and automotive.
Order part number H2X96, sold individually. Unit weight is approximately 1.208 g. Review your operating media and conditions against this specification before installation. APG supports cross-referencing from drawings, samples and competitor numbers when a listed size is not an exact fit.
Description 2MM CS X 96MM ID BLACK BUNA 70D
Actual Outside Diameter 100 mm (3.94 inch)
Actual Cross Section 2 mm (0.079 inch)
Actual Inside Diameter 96 mm (3.78 inch)
Measurement System Metric
Product Category O-Rings - Metric - Commodity