2MM CS X 14MM ID BLACK BUNA 90D

The H90M2X14 is a black Buna-N (Nitrile) 90 Shore A O-Ring built to an inside diameter of 14 mm (0.551 in), a cross section of 2 mm (0.079 in), and an outside diameter of 18 mm (0.71 in). This o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Buna-N (Nitrile) delivers strong abrasion and tear resistance, the most widely specified general-purpose sealing elastomer. Expect good resistance to hydraulic fluids, greases and lubricants, and water. Service temperature is rated from -40°F (-40°C) through 250°F (121.1°C). It is not the right choice where polar solvents or strong acids are present.

You will find this material specified across general industrial maintenance, agricultural equipment, and automotive.

Stocked as H90M2X14 and sold individually. Unit weight is approximately 0.211 g. As always, verify media compatibility and operating conditions against the requirements of your specific application. If you need a size, durometer or compound that is not listed, APG can cross-reference from a print, a sample or a competitor part number.