5MM CS X 150MM ID BLACK BUNA 90D

Ordered as H90M5X150, this is a black Buna-N (Nitrile) 90 Shore A O-Ring supplied with an inside diameter of 150 mm (5.906 in), a cross section of 5 mm (0.197 in), and an outside diameter of 160 mm (6.3 in). The o-ring seats in a machined groove and forms a leak-tight barrier when compressed between two mating surfaces.

Buna-N (Nitrile) is known for the most widely specified general-purpose sealing elastomer, strong abrasion and tear resistance. Expect good resistance to water, propane and butane, and greases and lubricants. The material carries a published service range of -40°F (-40°C) to 250°F (121.1°C). Verify compatibility before use with ketones or ozone and direct sunlight.

Typical settings include automotive, agricultural equipment, and general industrial maintenance.

H90M5X150 ships individually. Unit weight is approximately 13.478 g. Check the compound against your process media, pressure and temperature before committing to a design. Not finding the exact configuration you need? APG cross-references from prints, samples and competitor part numbers.